Parallel shaft helical geared motors SIMOGEAR & MOTOX Siemens
In addition to the geared motors, we also offer the configuration of your required drive (required torque, power, speed, etc.). Due to our long-standing contact to all relevant geared motors manufacturersn we can convince with low prices. Let us now send you a non-binding offer! By the way, we also sell drives such as standard motors and special motors.
SIMOGEAR parallel shaft helical geared motors from Siemens
Technical data
Available gear torques: From 150 to 9.000 Nm
Gearbox designation:
- From FZ29 to FZ189 (2-stage)
- From FD29 to FD189 (3-stage)
Gearbox ratio:
- From 4 to 70 (2-stage)
- From 58 to 413 (3-stage)
- From 315 to 38.522 (multistage)
Max. Motor output: 55 kW
Advantages
- Space-saving installation
- Very large transmission ratio range due to the plug-in pinion principle
- Direct mounting with hollow shaft in slip-on design possible
High energy efficiency (per stage approx. 98% efficiency)
Gearbox designs:
- Number of stages: 2 or 3
- Mounting: Foot, flange, housing flange, slip-on design (torque arm)
- Shaft: Solid shaft, hollow shaft, splined hollow shaft, hollow shaft with shrink disc
MOTOX parallel shaft helical geared motors from Siemens
Technical data
Available rated gear torques: From 150 to 34,000 Nm
Gearbox designation from Siemens with max. Gearbox nominal torque:
- FZ28B, FD28B: 150 Nm
- FZ38B, FD38B: 290 Nm
- FZ48B, FD48B: 540 Nm
- FZ68B, FD68B: 1.000 Nm
- FZ88B, FD88B: 1,900 Nm
- FZ108B, FD108B: 3.400 Nm
- FZ128B, FD128B: 6,100 Nm
- FZ148B, FD148B: 9,000 Nm
- FZ168B, FD168B: 14,000 Nm
- FZ188B, FD188B: 20,000 Nm
- FZ208, FD208: 34.000 Nm
FZ = two-stage parallel shaft gear units, FD = three-stage parallel shaft gear units
There are also double gear units with up to 6 stages and a maximum nominal gear torque of 71,388 Nm
Max. Motor power: 200 kW
Advantages
The MOTOX parallel shaft helical geared motors from Siemens have a wide transmission ratio range due to the plug-in pinion principle. This makes it possible to achieve such a high torque with only 2 stages, as is only possible with 3 stages for parallel shaft helical geared motors from other manufacturers. The fewer stages, the higher the efficiency!
You are interested in drive technology from Siemens?
Since 1993 we are responsible for our further growing customer base. We would be pleased if we could also support you. Please contact us or …